Atlantis Land A02-F8-2C/M2 - Manual (Page 15)

11
Rear Panel
The rear panel of the Switch consists of an AC power connector. The
following shows the rear panel of the Switch.
Figure 3-2. Rear panel view of the 10-port 10/100/1000Mbps Gigabit
Ethernet Switch
♦ AC Power Connector This is a three-pronged connector that
supports the power cord. Plug in the female connector of the
provided power cord into this connector, and the male into a
power outlet. Supported input voltages range from 100 ~ 240
VAC at 50 ~ 60 Hz.
LED Indicators
The LED indicators of the Switch include Power, SPEED, LINK/ACT
and FDX/COL. The following shows the LED indicators for the
Switch along with an explanation of each indicator.