Datamax-O'Neil MP Compact4_MP Compact4 Mobile Mark II Peel Off Option - Manual (Page 2)

Overview
This document describes the contents, installation, and use of the Peel Off Option option for the MP
Compact printers. After verifying the contents of the kit and the tools needed, follow the steps below to
install and begin using the option.
CAUTION
For your safety and to avoid equipment damage, always turn ‘Off’ power and unplug the
printer’s power cord before beginning this installation and when performing service.
Contents of the Peel Off Kit
This kit contains the following item:
1 x Peel Off
4 x Screw (MC6S 5x12)
4 x Spacer
4x Lock Washer
1 x Peel Off Bar
2 x Screw (MRX 3x6)
2 x Washer (FZB 3.2)
Tools Required
To install this option, you will need
Allen Key, 3mm
Phillips
Screwdriver
1