Datamax-O'Neil OC-3 SERIES User Guide - Manual (Page 11)

S
ETTING UP YOUR PRINTER
7
Loading media
The OC-3 series of printers are designed to print label media
and receipt paper. The printer is configured to print labels.
Load media as follows:
1. Position the printer so that the Datamax-O’Neil logo is facing
you (Figure 18).
2. Press the printhead release and open the printer (Figure
19).
Media Guidelines
Media width
Label Media: 1” - 3.125”
Receipt Paper: 1” - 3.125”
Roll capacity
diameter Label Media: 2.25”
Receipt Paper: 2.25”
Media types Linered back label media, receipt paper media
* Depending on the type of media used, you may
need to configure your printer. For more
information, see "Configuring the printer" on
page 11.
Figure 18 Figure 19
Printhead release