Datamax-O'Neil Workstation series User Guide - Manual (Page 15)

Overview | 2
7 Workstation Series User’s Guide
Standard Features
The thermal printer has the following standard features:
Table 1: Standard Features
Features Descriptions
Max Print Speed 4 IPS / 102 mmps
Resolution 300 dpi / 11.8 dpmm
Memory 32MB Flash (4MB User Space) / 32MB DDR2 RAM
Printer Type Direct Thermal
Media Supply • Roll-fed
• Die-cut
• Continuous Labels: (5” [127mm] roll max diameter on 1.0” and
1.5” [25.4mm and 38mm] core)
Double-sided Top-of-Form
Sensor Fixed position for center-biased stock:
• Label Gap
• Reflective black mark on the bottom or the top of the form
Tear Bar Bar for tearing off gapped or continuous media
Media Back Feed Capable of backing up; max 0.5”
Control Panel Two buttons
Reset Button Inset on the rear of the unit
LEDs Two LEDs: Green - Power On, Red - Error
Power Switch Positioned on the rear of the unit
Chassis / Media Cover Plastic construction with a clear window
Bar Codes See Appendix A
Fonts See Appendix A
Downloadable Font Types • True-Type Scalable
• PCL Bitmap (300 dpi)
Graphics Full support of PCL5e and GL/2 graphics capability.
(Support for various host-based file fomats [PCX, BMP] are not part of
the PCL5e standard but are supported and converted by standard
applications)
Industry Standard Printer
Language HP PJL, HP PCL5e, HP GL/2 and HP XL, printer languages with auto-
language select and extensions for barcode capabilities. Bi-directional
communications capability is also supported.
Interfaces • USB 2.0 Device
• LAN 10/100