Datamax-O'Neil PrintPAD MC65 User Guide - Manual (Page 7)

5
PrintPAD MC65 USER'S GUIDE
Printing a Self-Test
1. Open the printer's cover.
2. Press and hold the red self-test button for 4-5 seconds, until the printer starts to print (Figure 13).
3. After printing starts, release the red self-test button.
Configuring the Printer
The printer has many configurable settings. To configure or upgrade firmware, download the Windows configuration
program at www.datamax-oneil.com.
Using the Printer Data Cables
1. Select the appropriate cable for use with the host and/or device you are using.
2. Insert the plug into the printer’s data port (Figure 14).
Note: Do not close the lid or damage will occur to the cable. The data cable is intended only for reflashing the
printer.
Figure 13
Figure 14