Datamax-O'Neil PrintPAD CN3_4_3e_4e User Guide - Manual (Page 6)

4
PrintPAD CN3/4 & PrintPAD CN3e/4e USER'S GUIDE
Compatible Handheld Computers
Installing the Battery Spacers
1. Verify the battery type being used in the Intermec® CN3 or CN4 Handheld unit.

Standard Battery (Model AB8)

Extended Battery (Model AB9)
2. If using the Standard Battery, install the Battery Spacers using a screwdriver.
Note: The PrintPAD CN3/4 & PrintPAD CN3e/4e are intended for use with UL Listed Accessory Handheld Computer
Intermec CN3, CN3e, CN4, and CN4e.
Note: If the extended battery is not being used, the battery spacers must be installed. The battery spacers do not
come installed.
Caution: Over-torquing the screws will strip the screw holes. It is recommended that the screws be tightened by
hand.
Note: The Intermec CN3e handheld unit does not require battery spacers.
Figure 6
Figure 7