Datamax-O'Neil PrintPAD 7900 User Guide - Manual (Page 7)

4
PRINTPAD 7900 USER'S GUIDE
Using a Handheld Computer (HHC)
1. Insert the handheld into the cavity.
2. Press down until the handheld is fully seated
(Figure 2). The locking lever “clicks” into place. If
the locking lever fails to “click” into place, carefully
lift the lever toward the handheld (Figure 3). The
locking lever should securely hold the handheld into
place.
Removing the Handheld
1. Unlock the locking lever so that the printer can be
removed from the cavity.
2. The handheld should easily lift out of the cavity; do
not use force to remove the handheld.
Compatible Handheld Computers
Note: The PrintPAD 1700/1800/2700/2800 is intended
for use with UL Listed Accessory Handheld Computer
Symbol Technologies SPT17 series, PPT27 series, or
PPT28 series.
The PrintPAD 9000 is intended for use with UL Listed
Accessory Handheld Computer Symbol Technologies
MC90 series.
Locking lever
Figure 2 Figure 3