Draw-Tite 75121 MAX-FRAME RECEIVER - Manual

INSTALLATION INSTRUCTIONS
Product No.
TOOLS REQUIRED
SMALL PARTS
PACKAGE 01130-492
WARNING: DO NOT LUBRICATE THREADS, BOLT FAILURE MAY
OCCUR DUE TO OVER TIGHTENING.
WARNING: DO NOT DRILL OR WELD TO THIS HITCH. IMPORTANT NOTES
USE ONLY TOWING PRODUCTS SUPPLIED OR APPROVED BOLTS,
LOCKNUTS, AND WASHERS TO INSTALL THIS HITCH
CHEVROLET & GMC VANS
9/16" SOCKET
9/16" WRENCH
3/4" WRENCH
3/4" SOCKET
TORQUE WRENCH
1/2" SERRATED WASHER
1/2" LOCK WASHER
1/2" NUT
1/2" CARRIAGE BOLT
BOLT PLATE
1/2" HEX BOLT
3/8" LOCK NUT
3/8" SERRATED WASHER
75121
PLYMOUTH, MI
1. Remove the two lower bumper support brackets, one per side; save the bolts and washers. Save the bracket and return to the
owner.
2. Place the left and right side brackets against the frame bottom. Install four 1/2" bolts and washers removed in step one. Leave
the bolts loose.
(OVER)
For Installation Assistance or Technical Help, Call 1-574-537-6339
N75121-12-11-02 EWO3289 © 2002 TOWING PRODUCTS Litho in USA