Acnodes PC 5150 - Manual (Page 3)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7152
14” short depth server
RMC 7152
14” short depth server
3
RMC 7155
14” short depth server
Installing the Chassis Rails
Position the fixed chassis rail sections you just removed along the side of the chassis making sure the five screw holes line up.
Note that these two rails are left/right specific. Screw the rail securely to the side of the chassis (see Figure
2-2). Repeat this procedure for the other rail on the other side of the chassis. You will also need to attach the rail brackets
when installing into a telco rack.
Locking Tabs: As you have seen, both chassis rails have a locking tab, which serves two functions. The first is to lock the
server into place when installed and pushed fully into the rack, which is its normal position. Secondly, these tabs also lock the
server in place when fully extended from the rack. This prevents the server from coming completely out of the rack when you
pull it out for servicing.