Draw-Tite 4456 GOOSENECK RAIL KIT - Manual

Installation Instructions
GOOSENECK MOUNTING KIT
Chevrolet/GMC 2500/3500 Heavy Duty
Short & Long Bed
Part Numbers:
4456
Equipment Required:
Fastener Kit: 4456F
Wrenches:
15/16”, 15/16”Crowfoot Adaptor
Drill Bits: 1/4”
Other Tools: Drill, Reciprocating saw
WARNING: Under no circumstances do we recommend
exceeding the towing vehicle manufacturers recommended vehicle
towing capacity.
All Fasteners Typical, Both Sides
9465/9475 HIDE-A-GOOSE HITCH
INSTALLATION
Vehicle Forward
As an option you can loosen or remove truck
bed bolts to raise bed above top of truck
frame. This will allow more room to slide rail
kits in place. See following pages for detail.
Optional, Raise Bed: 18mm socket, 15” extension
z 2011 Cequent Performance Products Sheet 1 of 8 4456N 8-17-11 Rev. B
Qty. (10) 5/8-11, Hex Nut Qty. (4) Block 1/4 X 1.13 x 3.00
Qty. (10) 5/8” Conical Toothed Washer Qty. (2) Block 5/8 X 1.50 X 2.13
Qty. (6) 5/8 X 2.50 Carriage Bolt – GR5 Qty. (4) Shims, 5/16 X 2.00 X 1.00 (Not Shown)
Figure 1
8’ Bed Installation Shown
See Figure 6 for 6’-6” bed installation
5
6
4
3
2
1
Fasteners from
Hide-A-Goose
Hitch