Draw-Tite 63181 TOW BAR User Manual
Page 2
Towed vehicle attachment – NOT INCLUDED – (Shown for demonstration
purposes only)
A structure must be fabricated to allow the tow bar to be attached to the frame of the
towed vehicle. Some typical frame attachments are shown below. See your
professional Installer/Fabricator to have attachments made and installed.
If the bumper is used for support, it must be reinforced with frame attachments. A typical
way of reinforcing a bumper is shown below.
These frame attachments should be attached within 2” of where the tow bar brackets are
to be attached. These frame attachments should be made from at least ½” X 2” flat bar
stock. Never attach through plastic fascia covering a bumper. This fascia must be
trimmed, with customer approval, to provide a secure attachment.
2