Draw-Tite 5801200 BIKE CARRIER - SPORTWING - HITCH MOUNT - Manual (Page 2)

Item:
Description:
5801200
Cequent Consumers Products
27070 Miles Road
Solon, OH 44139
Technical Service: (800) 234-6992
5801200N Rev A 6-5-08
2-Bike Carrier
LOADING THE BIKE(S)
7.
Determine the appropriate setting for the wheel hook assemblies by measuring the “center to center”
distance of the bike wheels. (Figure 4)
8. Adjust the wheel hook assemblies to match the “center to center” bike wheel distance by sliding
assembly along the arm support. (Figure 5)
9. Firmly tighten the handles to secure wheel hook in position.
10. Load the smallest bike first on the vehicle side using the lower wheel hooks. (Figure 6)
11. Start with front wheel, and hang from wheel hook as shown in Figure 6.
12. Then mount the rear wheel on the opposite hook.
13. Secure both wheels by firmly attaching the rubber strap. (Figure 6)
14. Use two (2) Hook & Loop straps to hold the bike frame to the bike carrier arm supports as shown.
15. Load the second bike so that the handle bars are in the opposite direction of the first bike.
Repeat steps 11, 12, 13 and 14.
CENTER TO CENTER
DISTANCE – BIKE WHEEL
CENTER TO CENTER
DISTANCE - WHEEL HOOK
WHEEL HOOK
ARM SUPPORT
FIGURE 4
FIGURE 5
Page 2 of 4
FIGURE 6
HANDLE
RUBBER STRAP
HOOK & LOOP STRAP
RUBBER STRAP
HOOK & LOOP STRAP
VEHICLE SIDE