Abocom LA100 - Manual (Page 19)

Installation and go to step 6. Otherwise, select
Modify Parameters to make setting changed.
5.Move cursor to each field you want to make a
change and press <Enter> to select a fit value. When
the configuration are set completely, press <Enter>
on the OK field to exit the screen and go back to
step 4.
6.Installation program starts to copy related files
from driver diskette to the destination directory and
modifies CONFIG.SYS and PROTOCOL.INI under
user
’s agreement.
7. Please reboot the computer to load driver and
start LAN Manager in batch.
Example of PROTOCOL.INI: used by LAN
Manager
[PROTMAN]
DRIVERNAME = PROTMAN$
DYNAMIC = YES
PRIORITY = NETBEUI
[NETBEUI_XIF]
- 18 -