eLine Technology ECO3 Upgrade Instructions - Manual

Software Software Software Software Upgrade Upgrade Upgrade Upgrade
USB flash upgrade.
� Please read the statement carefully before upgrade.
� Please double check the version of the upgrade software you are using, so
you can restore it to the former version when your upgrade is failed. If your
system is running well or just don't need the new function, we recommend you
keep the default version. Please backup the important record files before
upgrade.
� Do ensure supplying the power and the stability of network when upgrading.
Network outages and interrupted power supply will cause upgrading failure.
� Please double check the version of the upgrade software, including
machine model and boot interface, and make sure whether it corresponds to
your system; If you have any doubts, don't upgrade.
� Don't modify the software (including the name of the firmware), otherwise,
we will take no responsibility and will not provide free updates.
� � � � When U disk upgrade, the upgrade file name must be upgrade.bin. you you you you
should should should should directly directly directly directly store store store store the the the the corresponding corresponding corresponding corresponding file file file file to to to to the the the the U U U U disk's disk's disk's disk's root root root root directory. directory. directory. directory.
M M M Make ake ake ake sure sure sure sure your your your your U U U U disk disk disk disk format format format format is is is is FAT32 FAT32 FAT32 FAT32 and and and and no no no no other other other other files files files files ....
S S S Steps: teps: teps: teps:
1.Unzip the main program file
Copy upgrade.bin to the U disk.
2. Plug into the USB port on the back or front panel of the DVR, and wait for
the DVR system recognizing the U disk.
3. Access to the main menu, select “sys.info”, click USB Upgrade.