eLine Technology EPTZ-27IR User Manual - Manual (Page 20)

Operation Manual of P T Z Dome Camera
19
2.7.4 Sector Setup
Function: To display the sector name when dome in the setted area
FUNCTION PROGRAMMING
1 PRESET
2 VECTORSCAN
3 PATTERN
4 SECTOR SETUP
5 MASK ZONE
6 MASK COLOR
7 MOTION
Sector Setup:
[1].Move the joystick up/down to move
the cursor to select sector setup.
[2].Move the joystick left/right or press
OPEN to enter the setting.
SECTOR SETUP
1 NUMBER 1
2 PAN START POS 0.0
3 PAN END POS 0.0
4 TILT START POS 0.0
5 TILT END POS 0.0
6 NAME ________
7 NAME DISPLAY OFF
[1]. Number
Joystick left/right or press OPEN to
select the sector number(number
range:1～8).
[2].Pan Start POS \Pan End POS\Tilt Start POS\ Tilt End POS
⑴ .Move the joystick left/right or press OPEN to select a Pan Start Point \Pan End
Point\ Tilt Start Point\ Tilt End Point.
⑵ .IRIS OPEN when done or press CLOSE to exit but not save.
[3].Name
⑴ .Select the sector name and press OPEN to enter name editing.
⑵ .Edit the name referring to preset setup instruction.
[4].Name Display
Joystick Up/Down to move the cursor to select Name Display of ON or OFF.