eLine Technology EYS-VMS eyStream Quick Start - Manual (Page 4)

4
Note
Refer to the document titled Recommended Platforms for obtaining detailed
information on recommended EyStream hardware and software platform
When working with EyStream, the user must keep in mind the limitations that the developer
imposed on the system in order to ensure its operability. The most important limitations are as
follows:
1. Use only Latin characters, Arabic numerals and the minus sign ( - ) to name your computer
with EyStream will be installed.
2. Never change the computer name after you have installed the system.
3. Synchronize the time among all the networked computers with EyStream installed.
4. Enable remote access to the computer with EyStream installed using NetBiosName.
5. TCP ports, dynamically specified by OS, are used while connecting the server-client.
To proceed with installation you must have Windows OS administrator rights.
The following two types of installations are available when installing EyStream to a personal
computer:
1. Server and Client— This type of installation is used to accomplish the following tasks:
a. Physical connection to a personal computer and software configuration of video and
audio capture devices (video cameras, microphones), event generation devices
(sensors, relays, etc.), and hard disks for organizing data archives.
b. All tasks accomplished with the Client type of installation (see below).
2. Client – This type of installation is used for installing the software's user interfaces, which
enable any user to connect to any server within a single security system and to perform
administration/management/monitoring of a guarded location based on the permissions
granted by the administrator.
To install the EyStream software package, perform the following steps:
1. Power up the PC and load the operating system.
2. Insert the EyStream installation CD into the CD-ROM drive.
Note
EyStream software package requires .NET Framework 2.0 and .NET Framework
3.5 SP1 The eyStream software package will install this software before the
EyStream installation.
1. Start the EyStream software installation.
2. Install the required configuration of EyStream (Server and Client/ Client) with specified
eyStream-domain and path of EyStream and database, by following setup prompts.
Installation of EyStream is now finished.
Licensing the Software package
After installation the EyStream software package is started in demo mode. Worktime period is from
8 am to 6 pm. There are no another limitations which includes functional limitations on software in
demo mode.
Activate the EyStream software package for full-function operation. To activate the software