eLine Technology PRO3-ECO3 Quick Start - Manual

eLineTechnology.com/support/documents Support 303.938.1133
Technical Support Knowledge Base
PRO3 & ECO3 Series – Quick Setup
Upon initial start-up
 Select VGA
 Click Confirm
 Start Wizard > yes
 Login > admin/888888
 Date/Time > change
 Click Save
 Click Next
 IP information > change if necessary
 Click Save
 Click Next
 Put a Checkmark in box next to the
Hard Drive appearing in the list
 Click Format
 Click Next
 Input Settings > 960H
 Click Save
 Click Copy > Select All
 Click Save
 Click Next
 Encode Parameters > leave default
 Click Next
 Click Finish
From Live main screen
 Right-click and choose Main Menu
 Login
 Choose Motion Detection Menu
 Select Motion
 Put a checkmark next to ALL
 Click Save
 Click Copy > Select ALL
 Click Save
Choose Alarm output form Motion
Detection Menu
 Uncheck Buzzer
 Click Save
Exit the Main menu
DVR is recording on motion if a yellow running
man icon appears in the top right corner of
each camera position.