eLine Technology iVMS-4000 V2.03 - Manual (Page 78)

User Manual of iVMS-4000(V2.03)
77
9.1.2.4 Video Tampering
1 st step: Select the channel number for video
tampering.
Select 
Note: If the device is DS-9000 series DVR, you
can click “Switch to digital channel” to configure the
video tampering of IP channel.
2 nd step: Enable “Video Tampering Alarm” to activate
s f “Setting Areas”, “ e” and “Linkage” ettings o Arm schedul
3 rd step: Set the video tampering area and sensitivity.
The sensitivity can be divided into three levels: Low,
Medium, and High.
Enable “Start Draw”, and select the detection area by
using mouse.