eLine Technology iVMS-2000 V2.0.2 - Manual (Page 54)

iVMS-2000 User Manual
49
1. Select [CD/DVD Writer] radio button;
2. Select drive in the combo box and set the disk name (default is current date). (Figure
4-17)
Figure 4-17 Select drive and set the disk name
Note: If the CD/DVD Writer device is not connected, the [CD/DVD Writer] button
will be in disabled status. (Figure 4-18)
Figure 4-18 Tips: Can’t detect device.
3. Click to start burning. A progress indicator will be shown below the
backup interface. (Figure 4-19)
Figure 4-19 Burning
Note: It is different from the local backup that there will be several stages first:
Preparing the Data, Initializing CD/DVD drive, Building the image. If during any of
these stage an error is detected an error dialog will be displayed. (Figure 4-20)
Figure 4-20: CD/DVD Rom Error
4. When CD/DVD burning process is complete the following dialog is displayed. (Figure
4-21)
Figure 4-21 Tips: Finish burning!
Note: User can cancel the burning operation by clicking the button.
Interrupting the burning process may result in corrupted image file and is thus not
recommended.