EXP Computer Bluetooth: Serial Port Profile - Manual (Page 5)

Follow the procedure shown below to do a fresh device inquiry.
5. Once device inquiry has completed, verify that the SPP server shows up in the device list,
then
tap on the device icon in order to perform a service discovery. Tap the Bluetooth Serial Port
service in order to select it.
NOTE: The SPP service name is configurable and may vary from device to device.
6. Tap on “Done” to confirm your selection.
7. Return to the application launch screen by tapping the “Home” silkscreen icon:
5. Run WidChat on the Visor/BlueConnect
WidChat is a sample chat application that was designed to demonstrate the ability of two
BlueConnect devices to communicate. This application is permanently burned into the ROM of
your BlueConnect card. In order to run the WidChat side of this example, you will need the
following:
• A Handspring Visor
• A BlueConnect 3.0 card
5.1 L AUNCH W ID C HAT
Tap to launch the WidChat application on the client Visor.