EXP Computer AudioDrive Ver. 3.0 - Manual (Page 17)

Audio Applications 3.0 User Guide
_________________________________________________________________________
_________________________________________________________________________
Installation Page 11
Note: If you have a previous version of the software and the Setup program
is unable to load the driver, follow this procedure:
1. Exit Windows and reboot your system.
2. Delete auddrive.drv, vaudrv.386, and threed.vbx from the directory
windows\system, if any of these files are present.
3. Restart Windows, ignoring any Windows error messages.
4. Insert Setup Disk 1 in a drive, then choose Run from the File menu,
enter a: or b: and setup, and click the OK button.
5. Go through the Setup program again.
Changing Audio Boards
You may wish to replace your present audio board with another type--
for example, replacing Audio Magician Plus with Stereo Magician Plus.
Before doing so, run the Setup program and choose the Driver Uninstall
option before you turn off the computer to change the board.
Once the new board is installed, run the Setup program again and choose the
Driver Installation option. This procedure loads the correct MIDI mapper
configuration file and other system information.
Important: Skipping the driver reinstallation procedure will most likely cause
the audio system to malfunction.