EXP Computer CD-420_CD-421_CD-621_CD-821 - Manual (Page 15)

- - 10
4. Add the following line at the TOP of your AUTOEXEC.BAT:
drive:\path \MSCDEX.EXE /D:MSCD001 /M:4
where drive:\path specifies the DOS directory or the directory containing
the file MSCDEX.EXE.
Note: If your AUTOEXEC.BAT file loads a menu program such as
DOSSHELL or Windows, you have to add the above line to start your
menu program. Otherwise, MSCDEX will not have a chance to load
before your menu program begins.
The example above shows the default setting. The /D: switch indicates
the device name. It MUST be the same name as you specified by the
/D: switch of EXPCDI.EXE in your CONFIG.SYS file. The /M: switch
indicates how much memory to allocate for caching information on the
CD-ROM. The default
/M:4 caches 8KB.
For more information about the switches of MSCDEX, please type “ help
MSCDEX ” at the DOS prompt.
5. Now, reboot your computer to activate the CD-ROM drive.