EXP Computer CD-820_CDG-820 - Manual (Page 14)

SOFTWARE INSTALLATION FOR DOS/WINDOWS 3.1
AUTOMATIC INSTALLATION
This INSTALL program helps you install the device driver into your computer
easily. Please follow the instructions below to proceed with the automatic
installation.
1. Insert the device driver diskette into the floppy disk drive on your computer
2. Change the working directory to the floppy drive containing the device driver
diskette by typing “ A: ” or “ B: ”, then press ENTER.
3. At the DOS prompt (A:\> or B:\>), type “ INSTALL ” followed by the ENTER
key.
4. Press ENTER or click on the OK button to continue. When the opening screen
appears, a dialog box will be displayed for you to specify the 1), directory to
install the device driver to; 2), the DOS directory to specify the location of the
MSCDEX driver, and 3), the I/O port desired for the CD-ROM. Enter the
directory you want to install the driver to and press the TAB key to forward to
the next field to indicate the DOS Directory. Press the TAB key again to set the
I/O port. The default setting for the I/O ports are (320-32F and 200-207). After
completing the selections, click on the Install button to continue.