EXP Computer CD Station - Manual (Page 16)

- 17 -
SOFTWARE INSTALLATION FOR WINDOWS NT
Make sure of the following before you begin:
♦
Windows NT must be version 3.51 or higher.
♦
Since Windows NT does not support the “Hot Insert/Remove” feature,
the PCMCIA CD-ROM should be connected with your computer prior
to starting Windows NT. Likewise, do not remove the PCMCIA CD-
ROM before you shut down Windows NT.
♦
In Windows NT, the I/O and IRQ settings of PCMCIA CD-ROM
cannot be changed. Therefore, if the settings conflict with other devices
you are using, change the I/O or IRQ of other device to avoid conflicts.
Installing the PCMCIA CD-ROM driver
To open the Control Panel folder, in Windows NT 4.0, go to the Start menu
and select Settings. Then, click on the Control Panel item. Once the
Control Panel window appears, double click the SCSI Adapter icon.
Click the Drivers tab and the illustrated figure below will be displayed.