EXP Computer CRW with CDROM Card - Manual (Page 26)

- 20 -
♦ Error: Illegal IRQ number!
The above message means invalid IRQ number in the ARICDI line of CONFIG.SYS have been
selected. The legal IRQ numbers are: 3, 4, 5, 7, 9, 10, 11, 12 and 15.
♦ Error: There is no available 4K memory for mapping!
The above message means ARICDI can’t find available 4K memory between C000:0 to EFFF:0.
This error can be corrected by changing the EMM386 line of CONFIG.SYS to exclude at least 4K
memory for mapping. For example,
DEVICE=C:\DOS\EMM386.EXE ... X=D000-D3FF
♦ Error: The INTEL 82365SL PCMCIA controller is not detected in your system. You should
contact your dealer to get PCMCIA support software.
The above message means the PCMCIA controller of your computer is not INTEL 82365SL
compatible. In this case, you should install PCMCIA support software that should be supplied by
the notebook manufacturer.
♦ CD-ROM Drive is not found!
The above message means ARICDI.EXE can’t find the external CD-RW drive. Please make sure
the CD-RW drive is properly connected to the PCMCIA interface card cable, and if use AC
adapter, ensure it is connected properly, and the Power Source Switch must at ‘DC’ position.
Error Messages Generated By MSCDEX.EXE:
♦ Device driver not found: 'MSCD001'
This means that ARICDI.EXE is not installed properly or you have entered a different /D: switch in
the MSCDEX line of AUTOEXEC.BAT. The device name specified by the /D: switch must be the
same as the /D: switch in the ARICDI.EXE line of CONFIG.SYS.