EXP Computer DVD-to-Go DVD_Mpeg2 - Manual (Page 7)

Installation
The instructions are for installation of the DVD-to-Go MCI drivers on a Windows 95 platform with VPM
1.10 or VPM 1.05 and PCMCIA 5.0 Card and Socket Services with Zoomed Video support.
• WINDOWS 95B [4.00.950 B] - OSR2
card and socket services provider (supports
Plug-and-Play):
Run PC Card Properties from the Control Panel to detect new card (see Figure 1).
Figure 1 - PC Card displays both empty slots.
Simply insert the DVD-to-Go

Card into the ZV-Enabled slot.
Figure 2 - New Hardware Found with OSR2 - PC Card
IMPORTANT
: Windows 95 will prompt for the location of the file ‘MARGIPNP.VXD’ since it
could not be found. At this point, simply type D:\ or A:\ (or the location of the installation CD-ROM or
floppy disc in which this file is located), and click OK. The drivers will then be automatically installed.
After the installation is complete, there will be 2 loud beeps once the card is recognized. (see Figure 3)
Margi-Billionton Installing Software - 2