EXP Computer EXP Sound card - Manual (Page 6)

- 3 -
PART NAMES AND FUNCTIONS
• •
Build-in Speaker:
This build-in 28 mm speaker is a MONO sound speaker.
‚ ‚
Volume Control Knob:
This knob is used to adjust the volume of the build-in speaker and
the external headphone jack.
ƒ ƒ
External Headphone Jack:
This is used to connect to a headphone or a self-powered external
speaker with the standard 3.5mm stereo plug. When using with
the external headphone or speaker, the build-in speaker will be
disabled.
„ „
External Microphone Jack:
This jack is used to connect to an external microphone with a
standard 3.5mm plug. When using with an external microphone,
the build-in speaker will be disabled.
(Note: This jack is designed for condenser type microphone only.
Do not use a magnetic type microphone..)
… …
Stereo Line-in Jack:
Use the cable that came with your Sound Module to connect with
another audio source. (CD player, Cassette tape player)
† †
Build-in Microphone
‡ ‡
Sound Module Cable:
This 15-pin cable connects to the PCMCIA interface card.