EXP Computer ThinCD E series for CDE-2440(PCMCIA Model), CDE-2450(USB Model), CDE-2465(Parallel Model) User Manual
Page 10
Advertising
10
Software Installation for USB Model
Windows 98
1. Power on your PC and make sure the USB port device driver is
installed and available in Windows 98.
2. Plug the USB cable into the USB port on your PC.
3. If this is the first time you are connecting the ThinCD drive to the
USB port of your PC, the Add New Hardware Wizard dialog box
will appear as below.
4. Click on Next, check the Search for the best driver for you
device and click Next.
Advertising