EXP Computer ThinLan 110 - Manual (Page 6)

ENABLING 32-BIT CARD SUPPORT OF WINDOWS 95
Your system should be ready for PCMCIA socket support prior to operating the
ThinLan PC card. To check whether your computer is PCMCIA Socket supported,
first, double-click on the “System” icon from “Control Panel” folder (You can
select the “Control Panel” under “Settings” from the “Start” menu to open the
“Control Panel” folder).
Click on the Device Manager Tab. If “PCMCIA Socket” is found with a cross (x)
sign next to the PCMCIA Controller as the following figure shows, it means the
PCMCIA device driver is not using 32-Bit Card Support.
In this case, double click on the PCMCIA Controller, and a dialog box will be
displayed as shown below. Place a check mark next to the current configuration of
the Device usage box, then select OK.
After the PCMCIA 32-Bit Card support is installed, Windows will ask you to
reboot your computer. Then you should refer to the first section titled “Windows
95 Installation”.
If the PCMCIA Socket is not found, then you must add a PCMCIA socket to your
system. Please click on the “Add New Hardware” icon in the Control Panel folder
and select “PCMCIA socket”. Select the appropriate type of PCMCIA Controller
that matches with yours notebook and follow the on-screen instructions.