FlexLink XT Compact Монтаж - Manual

XT Compact Shortening the chain
Doc
No.
000120-1
Mounting slide rail
Remove two screws (*) and loosen
the third one. Lift up the side plates. Remove the plastic guides.
To shorten the chain, use a 2 mm
mandrel to press out a steel pin... ...and remove as many links as nec-
essary to create a light pre-tension
in the chain.
*
1 2 3
4 5
To re-assemble the chain, press the
steel pin back to join the links.
6
Use a drill fixture to drill two holes at
the end of each slide rail section.
Countersink the holes. Insert rivets.
1 2