Biamp TesiraFORTE - Manual (Page 4)

3
Step 3
:
CONFIGURE YOUR CONFERENCING SOFTWARE
Once the USB cable is connected, the conferencing software
must be configured to use the USB audio. The following three
sections describe how to do this in Microsoft Lync, Skype, and
WebEx software:
1
2
3
4
5
Open Microsoft Lync
Go to
Tools Options Audio Device
Under Select the device you want to use for
audio calls, select the TesiraFORTÉ Speakerphone.
On this page, you can adjust volumes and test the
audio connection in both directions using the Speaker,
Microphone, and Ringer controls. You can also make
a test call using the Check Call Quality button.
Press OK
LYNC