Alcatel Carrier Internetworking Solutions Alcatel OmniAccess 4324 - Manual (Page 23)

Installing the Chassis 9
Chapter 2
Mounting the Chassis
Verify that your rack environment meets requirements (see
“Selecting a Location” on page 8 ).
Attach the rack mounting brackets to the switch chassis as
shown in
Figure 2-2 .
F IGURE 2-2 Attaching the Rack Mounting Brackets
Orient both brackets so that the narrow flange faces the front. When placed
properly, the brackets’ screw holes will match the holes on the side of the
chassis.
Use a Phillips or cross-head screwdriver to attach each bracket securely with
three 6-32 flat head screws (included).
1
2
x 6
6-32
flat head
screws