Brooks Instrument SLA7840 - Manual (Page 18)

2-6
Model SLA7840
Section 2 Installation Installation and Operation Manual
X-PR-SLA7800-RT-eng
Part Number: 541B048AAG
August, 2009
2-12 Electrical Interface (DeviceNet I/O)
Power and network signals are interfaced to the MFC through the standard
5-pin Micro-connector on the device. This connector is specified in the
DeviceNet Specification, Vol. 1, Section 9-3.6.3 and is defined as a male,
sealed, micro-style connector. The figure below illustrates the electrical
connections to the device.
Figure 2-1 5-pin Shielded Cable Hookup Diagram - Voltage I/O Versions
2-13 Electrical Interface (Analog I/O and RS-485)
Figure 2-3 Common Electrical Hookups for 15-Pin D-Connector Voltage I/O Version
Figure 2-2 15-Pin D-Connector Shielded Cable Hookup
Diagram - Voltage I/O Version