Burkert Type 0258 - Manual (Page 16)

14 - 0258
english
Electrical connections
ATTENTION!
The operating voltage and frequency of the electrical supply
must be the same as quoted on the rating plate of the drive.
The voltages and currents must not lie outside the permitted
operating range.
M 1 6
2 4 3
5
P1
Rs
Pole Pole Pole Pole Pole
configuration configuration configuration configuration configuration Pin 1 Pin 1 Pin 1 Pin 1 Pin 1 Pin 2 Pin 2 Pin 2 Pin 2 Pin 2
left running plus minus
right running minus plus
Plug configuration LC
Rs = 6.8 k
Ω
P1 = 1.0 k
Ω / 5.0 kΩ
Pole Pole Pole Pole Pole
configuration configuration configuration configuration configuration Pin 4 Pin 4 Pin 4 Pin 4 Pin 4 Pin 6 Pin 6 Pin 6 Pin 6 Pin 6
left running minus plus
right running plus minus
P1 = 5.0 k
Ω
Plug configuration Mod
NOTE With a pulsed drive and nominal voltage, the pulse duration
should not fall below 100 ms.
M M
1 2 3 4 6 5