Burkert Type 2712 - Manual (Page 4)

2 - EA 2012, 2702, 2712
engli
sh
To ensure serviceability and a long service life, please comply with the
information in these operating instructions, also the operating conditions and
permissible data specified in the datasheets for the utilized components:
• Keep to standard engineering rules in planning the use of and operating the
device!
• Installation and maintenance work are only allowed by specialist personnel
using suitable tools!
• Observe the current regulations on accident prevention and safety for
electrical devices during operation and maintenance of the device!
• Switch off the supply voltage in all cases before intervening in the system!
• Note that in systems under pressure, piping and valves may not be
loosened!
• Take suitable precautions to prevent inadvertent operation or damage by
unauthorized action!
• On non-observance to these notes and unauthorized interference with the
device, we will refuse all liability and the warranty on device and
accessories will become void!
Safety notes
Contact addresses
Germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13 - 17
D-74653 Ingelfingen
Tel.: +49 (0)7940/ 10 91 111
+49 (0)7940/ 10 91 448
E-mail: [email protected]
Warranty conditions
A prerequisite for validity of the warranty is use of the devices as intended with observance of
the specified conditions of use.
ATTENTION!
The guarantee only covers the serviceability of the
delivered components. No liability is accepted for any kind of
secondary damage which can occur through the failure or
malfunction of the components.
Fax:
International
Contact addresses can be found on the final pages of these printed operating instructions.
And also on the internet at: www.burkert.com