Burkert Type TKU001 - Manual (Page 10)

10
Operation and function
7.2. installation in the pipeline
procedure:
→
Check that the pipes which are to be connected to the ball valve are
on one level. This will prevent mechanical tension on the screw joint.
→
Screw the ball valve to the pipe.
→
Check that the ball valve is firmly attached to the pipe to ensure
appropriate tightness.
8. OperaTiOn and fUncTiOn
8.1. safety instructions
Warning!
danger due to improper operation!
Improper operation may result in injuries as well as damage to the
device and the area around it.
• The operating personnel must know and have understood the
contents of the operating instructions.
• Observe the safety instructions and intended use.
• Only adequately trained personnel may operate the equipment/
the device.
8.2. Operation of the ball valve
Via the mechanical interface as per ISO 5211, the ball valves can be
connected to a pneumatic rotary actuator (e.g. Types 2050 or 2051)
or an electric rotary actuator (e.g. Types 3003, 3004 or 3005).
english
Types 2651, 2654, 2660,
TKU 001