Burkert Type 6012 - Manual (Page 4)

8. maintenance, trOubleshOOting
8.1. safety instructions
Warning!
Risk of injury from improper maintenance!
• Maintenance may be carried out by authorized technicians only
and with the appropriate tools!
Risk of injury from unintentional activation of the system and
an uncontrolled restart!
• Secure system from unintentional activation.
• Following maintenance, ensure a controlled restart.
8.2. malfunctions
If malfunctions occur, check:
→
the line connectors,
→
the operating pressure,
→
the power supply and valve control.
If the valve still does not switch, please contact your Bürkert Service.
9. spare parts
Caution!
Risk of injury and/or damage by the use of incorrect parts!
Incorrect accessories and unsuitable spare parts may cause injuries
and damage the device and the surrounding area.
• Use only original accessories and original spare parts from Bürkert.
Fitting
Coil
Nut
Coil and fitting can be ordered
complete by quoting the iden-
tification number of the device
(see type label).
Wearing part set on request.
english
10. transpOrt, stOrage, dispOsal
note!
Transport damages!
Inadequately protected equipment may be damaged during
transport.
• During transportation protect the device against wet and dirt in
shock-resistant packaging.
• Avoid exceeding or dropping below the allowable storage
temperature.
Incorrect storage may damage the device.
• Store the device in a dry and dust-free location!
• Storage temperature:
-40 - 80 °C.
Damage to the environment caused by device components
contaminated with media.
• Observe applicable regulations on disposal and the environment.
english