Aprilaire 8366 - Manual (Page 10)

CLEANING THE THERMOSTAT
If the surface of the thermostat becomes dirty it can be cleaned with plain
water or a non-abrasive household cleaner including glass cleaner. When
using any cleaner, be careful not to get any into the interior of the
thermostat. Do not spray any liquid directly onto the thermostat. Spray the
cleaner on to a soft cloth and wipe the surface of the thermostat.
TO CLEAR THE “CHANGE WATER PANEL” OR
“CHANGE FILTER” INDICATOR
Your thermostat is equipped with indicators on the display to notify you when
it is necessary to change the systems filter and humidifier Water Panel.
1. Place the MODE switch in the OFF mode.
2. Push and hold both of the temperature ADJUST buttons simultaneously
(
▲ and ▼) until the alert clears from the display.
3. Thermostat will clear the change Water Panel or change air filter indicator.
TO CHANGE °F TO °C
The Aprilaire Thermostat is capable of displaying temperatures in
Fahrenheit or Celsius.
1. Place the MODE switch in the OFF mode.
2. Push and hold both of the temperature ADJUST buttons simultaneously
(
▲ and ▼) until “ROOM” and “OFF” are no longer displayed.
9
SET UP INSTRUCTIONS
MODE
Cool • Off • Heat
ADJUST
Press and Hold
Simultaneously for
Three (3) Seconds
MODE
Cool • Off • Heat
ADJUST
Press and Hold
Simultaneously for
Three (3) Seconds