Interfaces electrical connection, English, Bus connection (circular plug m12, 5-pole) – Burkert Type 8631 User Manual
Page 30: Top control on/off devicenet
28 - 8631
D
EVICE
N
ET
english
Interfaces
Electrical connection
The bus line is a 4-wire cable + screen which must comply with the DeviceNet specification. Over ist,
both the information (data) and energy are transmitted (voltage supply for low-power actuators and
sensors).
Bus connection (circular plug M12, 5-pole)
On the TOP Control on/off there is a 5-pole micro-style circular plug connector M12. The configuration
conforms to the DeviceNet specification.
Plug, looking at the pins from the front (not at the solder connections!)
Bus + supply
TOP
Control
on/off
DeviceNet
Bus
Pin
Signal
Colour
1
Screen
n.c.
2
V+
red
3
V-
black
4
CAN_H
white
5
CAN_L
blue
Voltage supply
11...24 V
max. Power consumption
5 W when all 3 valves are
switched
CAN_H
white
Data
lines
CAN_L
blue
1
2
3
4
5
V-
black
V+
red
Drain (screen))
n.c.