Burkert Type 8643 - Manual (Page 27)

8643 - 27
english
7 neTwork confIGuraTIon
7.1 memory allocation for user data Traffic
noTe!
Your control system handbook is the basis for the configuration of the net-
work!
In order to be able to apply the correct settings for the configuration pro-
gram, you will need the following files from the enclosed CD:
*.ffo, *.sym, *.fhx, *.cff
7.2 system parameters
noTe!
All data refers to the ITK version 5. •
Make sure that voltage is connected when writing the parameters! •
7.2.1 Block parameters of the transducer (do valve)
suitable for solenoid valve applications •
two proximity switches for each magnetic output •
the input signals give information on the ON/OFF state of the valve •
parameter description
vALvE_MAN_1...4 Name of valve manufacturer
ACTUATOR_MAN_1...4 Name of actuator manufacturer
vALvE_SER_NUM_1...4 Serial number of valve belonging to device
ACTUATOR_SER_NUM_1...4 Serial number of actuator belonging to
device
vALvE_ID_1...4 valve identifier (valve type)
ACTUATOR_ID_1...4 Actuator identifier (actuator type)