Burkert Type 8696 - Manual (Page 38)

38
Electricalinstallation24VDC
10. ELECTRICAL INSTALLATION 24 V DC
All electrical inputs and outputs of the device are not galvanically isolated from the supply voltage.
The kind of connection is used for the electrical bonding of the positioner:
• Multipole
with circular plug-in connector M12 x 1, 8-pole
10.1. Safety instructions
DANGER!
Risk of electric shock!
• Before reaching into the system, switch off the power supply and secure to prevent reactivation!
• Observe applicable accident prevention and safety regulations for electrical equipment!
WARNING!
Risk of injury from improper installation!
• Installation may be carried out by authorized technicians only and with the appropriate tools!
Risk of injury from unintentional activation of the system and an uncontrolled restart!
• Secure system from unintentional activation.
• Following installation, ensure a controlled restart.
english
Type 8696