Burkert Type 3003 - Manual (Page 19)

19
Transport,Storage,Disposal
10.3 returning from manual to automatic
operation
Returning to automatic operation:
→
Let go off the hand wheel to switch back into automatic operation.
The spring force automatically resets it to the „AUTO“ position.
→
Replace the position indicator.
The marking should now show the set position.
11 TransporT, sToraGe, Disposal
note!
transport damages!
Inadequately protected equipment may be damaged during transport.
• During transportation protect the device against wet and dirt in
shock-resistant packaging.
• Avoid exceeding or dropping below the permitted storage
temperature.
incorrect storage may damage the device!
• Store the device in a dry and dust-free location!
• Storage temperature: -10 … +55 °C.
damage to the environment caused by device components
contaminated with media!
• Observe applicable regulations on disposal and the environment!
• Observe national waste disposal regulations.
english
Type 3003