Burkert Type 7800 - Manual (Page 6)

8
3.4 Installation example
The drawing in fig. 2 shows an installation example.
Fig. 2
3.5 Electrical connection
• The electrical connection of the pump should be
carried out by qualified persons in accordance
with local regulations.
• For electrical data of the pump, see section 2.2.
• Do not lay signal cables, if any, together with
power cables.
TM
01
8
421
0
20
4
The 7800 pump can be installed in many different ways. The sketch below shows an example with side-
fitted control panel. The tank is a Buerkert chemical tank with a Buerkert level control unit.