AT&T BWX560 - Manual (Page 5)

BWX560 Users Manual and Installation Instructions
5
6. IRIS Level Control
Brightness Level can be adjusted from the IRIS level VR while using the direct drive
lens.
• Turn counterclockwise to L to get darker picture.
• Turn clockwise to H to get brighter picture.
7. V-Phase Adjustment Screw
The vertical phase may require adjustment to synchronize the vertical phase of the
camera with other camera in the system when it is to be used in the line-lock sync
mode. Make the adjustment when the vertical phase of the camera does not match with
other cameras.
8. Mounting Base and Fixing Screws
To use when the mounting bracket is required while mounting the camera. The
mounting base can be attached to either the top or the bottom of the camera, fix the
mounting base onto the camera by using the 4 supplied fixing screws.
9. Video Output Connector
BNC VBS 1.0 Vp-p, 75ohm
10. Audio Out Connector
11. Power Cable
12. DC12V/AC24V Screw Terminals