Global Specialties 1305 - Data Sheet - Manual

I N S T R U M E N T S
Model 1305
▼
Two consistently variable
0-32VDC @ 0-5AMP
outputs with coarse
and fine adjust
Constant Voltage/
Constant Current
operation with Green
LED indicators
Automatic transition
from (CV) to (CC) mode
at any voltage or current
within the range
Separate front panel
3 digit Green LEDs to
monitor Voltage or
Current from each
output
Each output is isolated,
therefore series or
parallel operation is
possible and extends
the output capabilities
to either 0-64VDC
@ 5 AMPS or 0-32VDC
@ 10AMPS
Remote sensing avail-
able on each output
Automatic overload and
short circuit protection
115-120VAC @ 60Hz or
211-220VAC @ 50Hz
operation
The 1305 DC Power Supply is a compact, high performance Dual output DC
power supply for industrial and laboratory use. The two main outputs are continuously
variable from 0 to 32V and can supply 5A max each. they can be operated in constant voltage or constant current
modes. Automatic transition from CV to CC mode may be set at any voltage or current within the range. Separate
front panel meters are provided to monitor output voltage and load current of the variable output sections.
The output voltage and current limit settings of the variable outputs can be varied manually using front panel controls.
All outputs are floating i.e., neither the output positive terminal nor the negative terminal (nor any point within the
regular circuitry) is connected to ground.