Getting started, Step 1 - power up the radio, Step 2 - scan for a wireless network connection – Grace Digital GDI-IRN1941 Victoria User Manual

Page 13

Advertising

Steps to Connect Your Radio to Your Wireless
Network

Getting Started

Step 1 - Power up the radio

To power your radio connect the AC Power on the back of your Nostalgic Radio to a wall power outlet
and turn the master power switch on the back. Then the radio can be switched on and off with the

Power / Vol button on the front of the radio.

Once powered on, the display on the front of the radio will light up and show:

Grace Digital Radio

After a few seconds, the screen will change to show :

Initializing

Network

After a few seconds, the screen will change to show:

Scan for networks

Enter network

View Config

Edit Config

Step 2 - Scan for a wireless network connection

When the display show <Scan for networks>, press the ‘Select’ button. (NOTE: IF you make an error at

any point, press the ‘Back’ button to return the previous screen)

The Nostalgic will now scan for all available wireless networks and will display:

Advertising