Green Air Products ECS-B Electrode Cleaning Solution MSDS - Manual

Green Air Products, Inc.
Electrode Cleaning Solution - B
Health & Safety Data Sheets
SECTION 1 - IDENTIFICATION OF PREPARATION
Product name: Item ID:
Electrode Cleaning Solution B ECS-B
Application:
Electrode Cleaning solution for pH electrodes
Manufacturer Identification: Green Air Products, Inc.
PO Box 1318
Gresham, OR 97030
SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS
Chemical characterization: Chemical composition:
Solution in water Sodium Hydroxide: <1%
SECTION 3 - HAZARD IDENTIFICATION
Irritant
SECTION 4 - FIRST AID MEASURES
Eye contact:
Skin contact:
Irrigate thoroughly with water. If discomfort Wash off thoroughly with water.
persists, obtain medical attention. Remove contaiminated clothing & wash
before re-use. If discomfort persists,
Ingestion: obtain medical attention.
Wash out mouth thoroughly with water and Inhalation:
give plenty of water to drink. In severe cases Remove from exposure, rest & keep warm
obtain medical attention. In severe cases, obtain medical attention.
SECTION 5 - FIRE FIGHTING MEASURES
Special risks:
Fire extinguisher:
N/A N/A
Special fire fighting precautions:
None
SECTION 6 - ACCIDENTAL RELEASE MEASURES
In case of accidental spill or release:
Wear protective clothing.
If local regulations permit, mop up with plenty of water and run to waste, diluting greatly
with running water. Otherwise transfer to container and arrange removal by disposal
company.
1