Hellwig Air 6108 - Manual (Page 7)

11. Check your installation to ensure that
all fasteners are tight and that the assembly
and all fasteners clear brake and fuel lines,
emergency brake cables, fuel tanks, wiring
harnesses, etc. Make sure that heat shields
are positioned for maximum protection of
air spring.
10. Attach brake relocation bracket to axle bracket as shown using 3/8X1” bolts,
washers and locknuts.
Attach brake hose bracket to brake relocation bracket as
shown using 3/8X1” bolts, washers and locknuts. Tighten bolts to 20-25 ft-lb.
Reposition brake lines as required to avoid any contact with shock absorber. Note
location of brake hoses, electrical lines or any other component that may contact air
spring assembly and reposition as required.
559-734-7451 800-367-5480 FAX 559-734-7460
6108 ( R-6108) 03/01/12
10a
Brake hose bracket
Brake Relocation Bracket
3/8X1” Bolts
10b