Hellwig Air 6113 User Manual
Page 8
11. Check your installation to ensure that
all fasteners are tight and that the assembly
and all fasteners clear brake and fuel lines,
emergency brake cables, fuel tanks, wiring
harnesses, etc. Make sure that heat shields
are positioned for maximum protection of
air spring.
10. Attach brake hose bracket to brake relocation bracket as shown using 3/8X1”
bolts, washers and locknuts. Tighten bolts to 20-25 ft-lb.
Reposition brake lines
as required to avoid any contact with shock absorber. Note location of brake
hoses, electrical lines or any other component that may contact air spring assembly
and reposition as required.
559-734-7451 800-367-5480 FAX 559-734-7460
10a
Brake hose bracket
Brake Relocation Bracket
3/8X1” Bolts
10b
Spacer Tab—Note
Orientation
6113 ( R-6113)
03/01/12