Hellwig Sway Bar 7719 - Manual (Page 3)

559-734-7451 800-367-5480 FAX 559-734-7460
7719 (R-7719) 12/21/2011
12. After all adjustments have been made, tighten the collar clamp bolts to 5-8 ft-lbs and the other bolts to fac-
tory specifications.
13. Reinstall both the factory subframe supports and factory splash guard.
14.
Bounce the vehicle checking for clearance on all under carriage components: fuel tank, shocks,
exhaust, differential, brake and fuel lines, etc. Test drive the vehicle and recheck all clearances and the
installation alignment. Adjust as needed. Re-check your installation after one week of driving and
periodically on a regular basis.
ATTENTION INSTALLER: PLEASE MAKE SURE CUSTOMER RECEIVES THIS INSTRUCTION
SHEET, ALL IMPORTANT NOTE CARDS, WARNING CARDS AND THE WARRANTY FORM
6